Arrow Pushers
← All chapters
7SeSubstitution & Elimination
Chapter 7 notes and study guide

Substitution and Elimination

SN2, SN1, E2 and E1: kinetics, stereochemistry, regiochemistry, leaving groups, and how to choose the winning pathway.

Notes

8 lessons. Tap a molecule to see it in 3D.

The cast: substrate, nucleophile, leaving group, solvent

Four things decide every substitution and elimination. Learn to classify each one.

An alkyl halide can do two things. In substitution, a nucleophile replaces the leaving group. In elimination, a base removes a hydrogen from the neighboring carbon, the leaving group departs, and a C=C forms. Which one happens, and by which mechanism, depends on four players.

1. The substrate

The carbon bonded to the leaving group is the α carbon. The carbons next to it are β carbons, and their hydrogens are the ones removed in elimination. Classify the α carbon by how many carbons are attached to it.

methyl
primary (1°)
secondary (2°)
tertiary (3°)

2. The nucleophile or base

Sort every reagent into one of four boxes. This is the most important habit in the chapter.

TypeExamples
Strong nucleophile, weak baseI⁻, Br⁻, Cl⁻, HS⁻, RS⁻, CN⁻, N₃⁻
Strong base, poor nucleophile (bulky)t-BuOK, DBU, DBN, LDA
Strong nucleophile and strong baseHO⁻, MeO⁻, EtO⁻
Weak nucleophile and weak baseH₂O, MeOH, EtOH

3. The leaving group

A good leaving group is a weak base, stable on its own once it has left with the electron pair. So the conjugate bases of strong acids leave well.

  • Excellent: I⁻, Br⁻, Cl⁻, and sulfonates such as tosylate (TsO⁻).
  • Good: H₂O, which is what leaves after an alcohol is protonated.
  • Terrible: HO⁻, RO⁻, NH₂⁻ and F⁻. An alcohol will not react until its OH is converted into something better.

4. The solvent

  • Polar protic solvents have O–H or N–H bonds (water, alcohols). They stabilize ions by hydrogen bonding. That helps carbocations form (good for SN1 and E1) and wraps up nucleophiles (bad for SN2).
  • Polar aprotic solvents are polar but have no O–H or N–H. They leave anions bare and reactive, which makes SN2 much faster.
DMSO
DMF
acetone
acetonitrile

The polar aprotic solvents to recognize.

SN2: substitution in one step

Backside attack, inversion, and why crowding kills the reaction.

SN2 stands for substitution, nucleophilic, bimolecular. The nucleophile attacks and the leaving group leaves in a single concerted step. There is no intermediate.

HO⁻CBrHCH₃Etbackside attack‡HOCBrHCH₃Etδ⁻δ⁻transition stateHOCHCH₃Et+Br⁻inverted product

What the mechanism tells you

  • Rate = k[substrate][nucleophile]. Both are in the one and only step, so doubling either doubles the rate.
  • Backside attack. The nucleophile must come in from the side directly opposite the leaving group, because that is where the empty antibonding orbital of the C–LG bond points.
  • Inversion of configuration. The three other groups flip to the other side, like an umbrella turning inside out in the wind. At a chirality center, R usually becomes S.
NaCN, DMSO+Br⁻

(S)-2-Bromobutane gives the (R) nitrile. The nucleophile ends up on the face opposite to where Br was.

Sterics control the rate

The nucleophile has to reach the α carbon. Every alkyl group on that carbon gets in the way.

RuleSN2 reactivity: methyl > 1° > 2° ≫ 3° (tertiary does not react by SN2 at all)
bromomethane: the back of carbon is wide open
tert-butyl bromide: the back is blocked by three CH₃ groups

Turn each model so the Br points away from you. That is the nucleophile's view.

Branching on the β carbon slows SN2 as well. Neopentyl bromide is primary, yet it is almost unreactive.

Best conditions for SN2

  • A methyl, primary or (less well) secondary substrate.
  • A strong nucleophile, usually an anion.
  • A polar aprotic solvent such as DMSO, DMF or acetone.
  • A good leaving group.
Exam trapInversion describes the geometry. R does not always become S, because replacing the leaving group can change the priority order. Draw the product with the nucleophile on the opposite face, then assign the label fresh.

SN1: substitution through a carbocation

Two steps, a flat intermediate, racemization and rearrangement.

SN1 is substitution, nucleophilic, unimolecular. The leaving group leaves first, on its own, to give a carbocation. The nucleophile attacks afterward.

CBrCH₃H₃CCH₃1. Leaving group leaves (slow)C⁺H₃CCH₃CH₃H₂OH₂Oempty p orbital2. Nucleophile attacks either face (fast)top-face product+bottom-face product= racemic mixture(then lose H⁺ to give the alcohol)
SN2: one step, no intermediateEnergyReaction progressR–X + Nu⁻TS ‡R–Nu + X⁻SN1: two steps, carbocation intermediateEnergyReaction progressR–XTS 1 ‡ (slow)R⁺TS 2 ‡product
SN2 has one transition state. SN1 has two, with a carbocation in the valley between them. The first step is the slow one.

What the mechanism tells you

  • Rate = k[substrate]. The nucleophile is not involved in the slow step, so its concentration and strength do not affect the rate.
  • Carbocation stability controls everything. 3° reacts fastest, 2° is slow, and methyl and 1° do not react this way. Allylic and benzylic substrates also react well, thanks to resonance.
  • Racemization. The carbocation is flat, so the nucleophile attacks either face. A single enantiomer of starting material gives a roughly 50:50 mixture of R and S product.
  • Rearrangement is possible. Any time a carbocation forms, check for a hydride or methyl shift to a more stable cation.
H₂O (solvolysis)+HBr

tert-Butyl bromide in water. Water is the solvent and the nucleophile. A final proton transfer gives the neutral alcohol.

Best conditions for SN1

  • A tertiary (or allylic, benzylic, sometimes secondary) substrate.
  • A weak nucleophile, usually the solvent itself: water or an alcohol.
  • A polar protic solvent, which stabilizes both the carbocation and the leaving group.
  • A good leaving group.
FeatureSN2SN1
Stepsonetwo
Rate lawk[RX][Nu]k[RX]
Best substratemethyl, 1°3°
Nucleophilestrongweak
Solventpolar aproticpolar protic
Stereochemistryinversionracemization
Rearrangementneverpossible
Exam trapWith water or an alcohol as the nucleophile, the first product still has an extra H on oxygen and a positive charge. Do not forget the last step, a proton transfer to the solvent.

E2: elimination in one step

Anti-periplanar geometry, Zaitsev versus Hofmann, and the role of a bulky base.

E2 is elimination, bimolecular. A strong base removes a β hydrogen at the same moment the leaving group leaves, and the electrons from the C–H bond become the new π bond. It is concerted, like SN2.

B⁻HCCBrH and Br anti-periplanar (180° apart)CC+B–H+Br⁻new π bond
  • Rate = k[substrate][base]. A strong base is required.
  • It works on 1°, 2° and 3° substrates. For tertiary substrates with a strong base, E2 is the only pathway.

The geometry requirement

The H being removed and the leaving group must be anti-periplanar: in the same plane, on opposite sides of the C–C bond, 180° apart. Only then do the orbitals line up to form the π bond.

BrRRHRRAnti-periplanarH and leaving group 180° apart

This requirement decides the stereochemistry of the alkene. In a cyclohexane ring it means both the H and the leaving group must be axial (trans-diaxial). An equatorial leaving group cannot undergo E2 until the ring flips.

Which β hydrogen? Zaitsev versus Hofmann

When there are different β carbons, more than one alkene can form.

  • Zaitsev product: the more substituted alkene. It is more stable, and it is the major product with a small strong base such as NaOEt or NaOH.
  • Hofmann product: the less substituted alkene. It becomes major with a bulky base such as t-BuOK, which can only reach the least crowded hydrogen.
NaOEt, EtOH

Small base: Zaitsev product, the trisubstituted alkene (major).

t-BuOK, t-BuOH

Bulky base: Hofmann product, the disubstituted alkene (major).

When E and Z alkenes are both possible, the trans (E) alkene is usually favored, because the transition state leading to it is less crowded.

Exam trapIf a substrate has only one β hydrogen that can be anti-periplanar to the leaving group, that hydrogen is the one removed, even if it gives the less substituted or the Z alkene. Geometry overrides Zaitsev.

E1: elimination through a carbocation

The same first step as SN1, followed by loss of a proton.

E1 is elimination, unimolecular. It begins exactly like SN1: the leaving group leaves to give a carbocation. Then, instead of attacking the carbon, a weak base removes a hydrogen from the carbon next to it.

H₂OHCC⁺carbocation from step 1 (same as SN1)CC+H₃O⁺Zaitsev alkene favored
  • Rate = k[substrate]. The base is not in the slow step.
  • It needs a carbocation, so it happens with 3° (and some 2°) substrates.
  • It gives the Zaitsev product, because the more stable alkene forms faster and there is no geometry requirement. The carbocation can rotate freely before losing the proton.
  • Rearrangements are possible, as in every carbocation mechanism.

SN1 and E1 come as a pair

Both pass through the same carbocation, so they compete, and a tertiary halide in water or alcohol gives a mixture. Two things tip the balance toward elimination:

  • Heat. Elimination makes more molecules, so it has the more favorable entropy. Higher temperature favors E1.
  • An acid whose conjugate base is a poor nucleophile, such as H₂SO₄.

Dehydration of alcohols

The most useful E1 reaction is turning an alcohol into an alkene with concentrated acid and heat. The acid protonates the OH and turns it into water, which is a good leaving group. Water leaves, and then a proton is lost from the neighboring carbon.

conc. H₂SO₄, heat+H₂O

The more substituted (Zaitsev) alkene is the major product.

TipE1 is rarely a reaction you choose on purpose with an alkyl halide, because it comes mixed with SN1. If you want an alkene from a halide, use a strong base and get clean E2.

Choosing the mechanism

A three-question routine that sorts any substitution or elimination problem.

You never need to guess. Ask three questions in this order.

Question 1: what kind of reagent is it?

Classify it as one of the four types from the first lesson of this chapter. This narrows the choice more than anything else.

Question 2: what is the substrate?

Methyl, 1°, 2° or 3°. Combine the two answers using this table.

ReagentMethyl or 1°2°3°
Strong nucleophile, weak base (I⁻, CN⁻, HS⁻, N₃⁻)SN2SN2SN1 (slow)
Strong bulky base (t-BuOK, DBU, LDA)E2E2E2
Strong nucleophile and strong base (HO⁻, MeO⁻, EtO⁻)SN2 majorE2 majorE2 only
Weak nucleophile and weak base (H₂O, ROH)no reactionSN1 + E1 (slow)SN1 + E1

Question 3: what are the regiochemistry and stereochemistry?

  • SN2: inversion at the α carbon.
  • SN1: racemization, and check for rearrangement.
  • E2: Zaitsev with a small base, Hofmann with a bulky base, and the H must be anti-periplanar to the leaving group.
  • E1: Zaitsev, and check for rearrangement.

Why the table looks the way it does

  • Tertiary substrates never do SN2, because the back side is blocked.
  • Methyl and primary substrates never do SN1 or E1, because their carbocations are too unstable.
  • A strong base beats a nucleophile once the substrate is crowded. That is why hydroxide gives substitution with a primary halide and elimination with a secondary or tertiary one.
  • A methyl halide has no β hydrogen, so it cannot eliminate at all.
Exam trapThe most common mistake is giving SN2 for a secondary halide with hydroxide or an alkoxide. The major product there is the E2 alkene. Secondary plus strong base means elimination.

The Mechanism picker tool on this site runs the same logic, if you want to test yourself.

Alcohols and tosylates

Turning a terrible leaving group into an excellent one, with control of stereochemistry.

Hydroxide is a strong base and a very poor leaving group, so an alcohol will not undergo substitution or elimination as it is. There are two standard fixes.

Fix 1: protonate it with a strong acid

In HBr, HCl or HI the oxygen is protonated first. The leaving group is now water, which is a weak base and leaves easily. The halide then substitutes.

  • Tertiary and secondary alcohols react by SN1 (carbocation, rearrangement possible).
  • Primary alcohols and methanol react by SN2.
HBr+H₂O

A tertiary alcohol and HBr: protonation, loss of water, then bromide attacks the carbocation.

Fix 2: make a tosylate

Tosyl chloride (TsCl) with a mild base such as pyridine converts an OH into a tosylate (OTs). Tosylate is the conjugate base of a strong sulfonic acid, with its charge spread over three oxygens, so it is a superb leaving group.

TsCl, pyridine

1-Butanol to butyl tosylate. Only the O–H bond breaks.

The key point is that the C–O bond is never touched when the tosylate is made, so the configuration at carbon is retained. A following SN2 then inverts it once.

RuleAlcohol → tosylate (retention) → SN2 (inversion) = one clean inversion overall, with no carbocation and no rearrangement.

Using a tosylate

Treat OTs exactly like Br. A strong nucleophile gives SN2. A strong, bulky base gives E2, which is the cleanest way to turn an alcohol into the less substituted alkene.

TipUse HX when you simply want the alkyl halide and stereochemistry or rearrangement is not a concern. Use TsCl when you need to control stereochemistry or avoid a carbocation.

Alkene stability and Zaitsev’s rule

Why the more substituted alkene is usually the major elimination product.

Alkenes are ranked by how many carbon groups are attached to the two carbons of the double bond.

monosubstituted
disubstituted
trisubstituted
tetrasubstituted: most stable
RuleStability: tetrasubstituted > trisubstituted > disubstituted > monosubstituted > ethylene

Why substitution stabilizes an alkene

The explanation is hyperconjugation, the same effect that stabilizes carbocations. Electrons in neighboring C–H and C–C σ bonds overlap slightly with the π system. More alkyl groups give more of these stabilizing overlaps.

Cis versus trans

cis-2-butene: methyls crowd each other
trans-2-butene: more stable by about 4 kJ/mol

Among alkenes with the same degree of substitution, trans is more stable than cis, because the two groups are on opposite sides and do not bump into each other.

Zaitsev's rule

In an elimination, the major product is normally the more substituted alkene, since the more stable alkene has the lower-energy transition state leading to it. The exceptions are the ones from the E2 lesson: a bulky base (Hofmann product), or a substrate where the required anti-periplanar hydrogen is only available on the less substituted side.

TipTo count substitution, look only at the two alkene carbons and count how many of their four positions are carbon instead of hydrogen.

Key ideas

The chapter on one page

The cast

  • Substrate: sp³ carbon bearing a leaving group (halide or sulfonate). Classify it as methyl, 1°, 2° or 3°.
  • Leaving group: must be a weak base. I⁻ > Br⁻ > Cl⁻ ≫ F⁻. Sulfonates (TsO⁻, MsO⁻, TfO⁻) are excellent. HO⁻, RO⁻ and H₂N⁻ never leave.
  • Reagent: decide whether it is a strong or weak nucleophile and a strong or weak base.

SN2

  • One step, concerted, backside attack. Rate = k[substrate][nucleophile].
  • Inversion of configuration.
  • Methyl > 1° > 2°. Never 3°. Steric hindrance is everything.
  • Wants a strong nucleophile and a polar aprotic solvent (DMSO, DMF, acetone, acetonitrile).

SN1

  • Two core steps: leaving group leaves (slow), nucleophile attacks the carbocation. Rate = k[substrate].
  • Racemization (often with a slight excess of inversion).
  • 3° > 2°. Also allylic and benzylic. Never methyl or 1°.
  • Weak nucleophile, polar protic solvent (water, alcohols). Rearrangements possible.

E2

  • One step. Base removes a β-hydrogen as the leaving group leaves. Rate = k[substrate][base].
  • H and leaving group must be anti-periplanar. In cyclohexanes both must be axial.
  • Small strong base → Zaitsev (more substituted alkene). Bulky base (t-BuOK) → Hofmann (less substituted).
  • 3° > 2° > 1°. Stereospecific when the β-carbon has one H; otherwise favors the E alkene.

E1

  • Same carbocation as SN1, then a weak base removes a β-hydrogen. Rate = k[substrate].
  • Always Zaitsev. Favors the E alkene. Rearrangements possible.
  • Competes with SN1. Heat favors elimination.
  • Alcohol + conc. H₂SO₄ + heat is the classic E1.

Choosing the pathway

  • Strong nucleophile, weak base (I⁻, HS⁻, RS⁻, CN⁻, N₃⁻): SN2 (SN1 if 3°).
  • Strong base, poor nucleophile (t-BuOK, DBU, DBN, LDA): E2.
  • Strong nucleophile and strong base (HO⁻, MeO⁻, EtO⁻): 1° → SN2 major; 2° → E2 major; 3° → E2 only.
  • Weak nucleophile and weak base (H₂O, ROH): 3° → SN1 + E1; 1° → nothing useful.

Alcohols and tosylates

  • OH is a terrible leaving group. Fix it by protonation (strong acid) or by making a tosylate.
  • ROH + TsCl, pyridine → ROTs with retention (the C–O bond is untouched).
  • Then SN2 on the tosylate inverts. Net: one clean inversion.

Alkene stability

  • Tetrasubstituted > trisubstituted > disubstituted > monosubstituted. Trans > cis.
  • Reason: hyperconjugation, and less steric strain in trans.
  • Bredt's rule: no double bond at a bridgehead in a small bicyclic.

Flashcards

84 cards

Classify the reagent, leaving group or solventDrill this deck

PromptAnswer
I⁻, Br⁻, Cl⁻Strong nucleophiles, weak bases → substitution
HS⁻ and RS⁻Strong nucleophiles, weak bases → SN2
CN⁻ and N₃⁻Strong nucleophiles, fairly weak bases → SN2
HO⁻Strong nucleophile and strong base
CH₃O⁻ and CH₃CH₂O⁻Strong nucleophiles and strong bases. E2 with 2° and 3°, SN2 with 1° and methyl.
t-BuOK (potassium tert-butoxide)Strong, bulky base and poor nucleophile → E2, Hofmann product
DBU and DBNStrong, non-nucleophilic amine bases → E2 only
LDA (lithium diisopropylamide)Very strong, bulky, non-nucleophilic base
NaHStrong base only (H⁻). It does not act as a nucleophile toward alkyl halides.
NaNH₂Very strong base. Used for double eliminations and to deprotonate terminal alkynes.
H₂O, CH₃OH, CH₃CH₂OHWeak nucleophiles and weak bases → SN1/E1 with 3° substrates (solvolysis)
H₂S and RSHGood nucleophiles, weak bases
Leaving group ability of the halidesI⁻ > Br⁻ > Cl⁻ ≫ F⁻
What makes a good leaving group?It is a weak, stable base: the conjugate base of a strong acid.
Tosylate (–OTs)Excellent leaving group. Made from an alcohol with TsCl and pyridine.
Mesylate (–OMs) and triflate (–OTf)Excellent sulfonate leaving groups. Triflate is the best of the three.
Can HO⁻ act as a leaving group?No. Protonate it so it leaves as H₂O, or convert it to a sulfonate.
Polar aprotic solventsDMSO, DMF, acetone, acetonitrile, HMPA. No O–H or N–H. They speed up SN2.
Polar protic solventsWater, alcohols, acetic acid. They stabilize ions and favor SN1/E1.
Why do polar aprotic solvents speed up SN2?They solvate the cation but leave the anion "naked" and highly reactive.
Nucleophilicity of halides in a protic solventI⁻ > Br⁻ > Cl⁻ > F⁻. Small anions are caged by hydrogen bonds.
Nucleophilicity versus basicityNucleophilicity is kinetic (how fast it attacks carbon). Basicity is thermodynamic (how strongly it holds H⁺).
Vinyl and aryl halides in SN1/SN2Unreactive. Backside attack is blocked and the sp² cations are too unstable.
Allylic and benzylic halidesExtra reactive in both SN2 (stabilized transition state) and SN1 (resonance-stabilized cation).

SN2 versus SN1Drill this deck

PromptAnswer
SN2 rate lawRate = k[substrate][nucleophile]. Second order, bimolecular.
SN1 rate lawRate = k[substrate]. First order, unimolecular.
SN2 mechanismOne concerted step: backside attack as the leaving group departs
SN1 mechanismLoss of leaving group gives a carbocation, then nucleophilic attack (then deprotonation if the nucleophile was neutral)
SN2 stereochemistryInversion of configuration
SN1 stereochemistryRacemization, often with a small excess of the inverted product
SN2 substrate orderMethyl > 1° > 2° ≫ 3° (no reaction)
SN1 substrate order3° > 2° ≫ 1°, methyl (no reaction). Allylic and benzylic are also good.
Best nucleophile for SN2Strong (often anionic)
Nucleophile in SN1Usually weak and neutral, often the solvent. Its concentration does not affect the rate.
Best solvent for SN2Polar aprotic
Best solvent for SN1Polar protic
Rearrangements: SN2 or SN1?Only SN1. There is no carbocation in SN2.
SN2 energy diagramOne transition state, no intermediates
SN1 energy diagramTwo transition states and one carbocation intermediate. The first step is rate-determining.
SN2 transition stateCarbon partly bonded to both nucleophile and leaving group, 180° apart, with the other three groups flat
Why is neopentyl bromide slow in SN2 even though it is primary?The bulky tert-butyl group next door blocks the backside.
Why does SN2 invert configuration?The nucleophile attacks the lobe of the C–LG σ* orbital on the side opposite the leaving group.
SolvolysisA substitution in which the solvent is the nucleophile
Alcohol + HBr: 1° versus 3°1°: SN2 on the protonated alcohol. 3°: SN1 through the carbocation.

E2, E1 & alkene stabilityDrill this deck

PromptAnswer
E2 rate lawRate = k[substrate][base]
E1 rate lawRate = k[substrate]
E2 geometry requirementThe β-hydrogen and leaving group must be anti-periplanar (180° dihedral).
E2 in a cyclohexane ringThe leaving group and the β-hydrogen must both be axial (trans-diaxial).
Zaitsev productThe more substituted, more stable alkene
Hofmann productThe less substituted alkene
Which bases give Hofmann products?Bulky ones: t-BuOK, LDA
E2 substrate order3° > 2° > 1°. All can react, since the base only touches a hydrogen.
E1 substrate order3° > 2°. 1° does not react this way.
E1 regiochemistryAlways Zaitsev
Stereospecific E2When the β-carbon has only one H, the anti-periplanar requirement fixes whether E or Z forms.
Stereoselective E2When the β-carbon has two H's, both alkenes can form and the more stable E isomer is favored.
Does E1 rearrange?Yes. It goes through a carbocation.
Effect of heat on substitution versus eliminationHeat favors elimination, which has a more positive ΔS.
Reagents for alcohol dehydrationConcentrated H₂SO₄ (or H₃PO₄) and heat. E1 for 2° and 3° alcohols.
Alkene stability orderTetrasubstituted > trisubstituted > disubstituted > monosubstituted > ethylene
cis versus trans alkene stabilityTrans is more stable. Cis has steric strain between the groups.
Why are substituted alkenes more stable?Hyperconjugation from neighboring C–H bonds into the π system
Bredt's ruleA double bond cannot sit at the bridgehead of a small bridged bicyclic compound.
β-hydrogenA hydrogen on a carbon adjacent to the carbon bearing the leaving group
RegioselectiveOne constitutional isomer forms in preference to another.
Stereoselective versus stereospecificSelective: one stereoisomer is favored. Specific: the stereochemistry of the substrate dictates the stereochemistry of the product.

Predict the pathwayDrill this deck

PromptAnswer
1° alkyl halide + NaCN in DMSOSN2
1° alkyl halide + NaOCH₃SN2 major, E2 minor
1° alkyl halide + t-BuOKE2 major
2° alkyl halide + NaSHSN2 with inversion
2° alkyl halide + NaOEt in EtOHE2 major (Zaitsev), SN2 minor
2° alkyl halide + t-BuOKE2, Hofmann product
3° alkyl halide + NaOH or NaOEtE2 only
3° alkyl halide + H₂O or ROHSN1 + E1 mixture
3° alkyl halide + NaI or NaBrSN1
Methyl halide + any good nucleophileSN2 only. There is no β-hydrogen, so no elimination.
2° alkyl halide + DBUE2
1° alkyl halide + H₂ONo practical reaction. Too slow for SN2 and no stable carbocation for SN1.
2° or 3° alcohol + conc. H₂SO₄, heatE1 dehydration to the Zaitsev alkene
3° alcohol + HBrSN1 to the alkyl bromide
1° alcohol + HBrSN2 on the protonated alcohol
Alcohol + TsCl, pyridineTosylate, with retention of configuration
2° tosylate + NaN₃ in DMFSN2 with inversion
Vinyl bromide + NaCNNo reaction

Practice questions

A sample of the 80 in this chapter. Open one to check your answer.

Leaving groups, nucleophiles & solventsTake the quiz (10 questions)

Which is the best leaving group?

Answer: I⁻

Iodide is the weakest base of the four. HI has pKa −10.

Which cannot act as a leaving group under normal conditions?

Answer: HO⁻

Hydroxide is a strong base. Once protonated, the same oxygen leaves easily as water.

Why is tosylate an excellent leaving group?

Answer: It is the resonance-stabilized conjugate base of a strong acid

The negative charge is spread over three oxygens.

SN2Take the quiz (11 questions)

In an SN2 reaction, the concentrations of both the substrate and the nucleophile are doubled. The rate…

Answer: quadruples

Rate = k[substrate][nucleophile], so 2 × 2 = 4.

What is the stereochemical outcome of an SN2 reaction at a chirality center?

Answer: Inversion

The nucleophile attacks from the side opposite the leaving group.

Which substrate reacts fastest in an SN2 reaction?

Answer: CH₃Br

Less steric hindrance means easier backside attack.

SN1Take the quiz (10 questions)

In an SN1 reaction the nucleophile concentration is doubled. The rate…

Answer: is unchanged

Rate = k[substrate]. The nucleophile arrives after the slow step.

What is the intermediate in an SN1 reaction?

Answer: A carbocation

The leaving group departs first, leaving a planar sp² carbon.

(S)-3-Bromo-3-methylhexane is heated in water. The substitution product is…

Answer: racemic 3-methylhexan-3-ol

The planar carbocation is attacked from both faces.

E2Take the quiz (12 questions)

What geometry must the β-hydrogen and leaving group adopt in an E2 reaction?

Answer: Anti-periplanar

The orbitals must line up so the C–H electrons flow into the back of the C–LG bond.

2-Bromo-2-methylbutane is treated with NaOEt. What is the major product?

Answer: 2-Methylbut-2-ene

3° substrate with a strong, small base: E2 giving the Zaitsev (trisubstituted) alkene.

2-Bromo-2-methylbutane is treated with t-BuOK. What is the major product?

Answer: 2-Methylbut-1-ene

A bulky base removes the most accessible hydrogen, giving the Hofmann product.

E1 & alkene stabilityTake the quiz (9 questions)

What is the first step of an E1 reaction?

Answer: Loss of the leaving group to form a carbocation

E1 and SN1 share the same slow first step.

Which alkene does an E1 reaction favor?

Answer: The Zaitsev product, whatever the base

The carbocation loses whichever proton gives the most stable alkene.

Cyclohexanol is heated with concentrated H₂SO₄. What forms?

Answer: Cyclohexene

Acid protonates the OH, water leaves, and the carbocation loses a proton: E1 dehydration.

Pick the mechanismTake the quiz (13 questions)

Which pathway dominates? 1-Bromobutane + NaI in acetone

Answer: SN2

Primary substrate, strong nucleophile that is a weak base, polar aprotic solvent.

Which pathway dominates? 2-Bromobutane + NaOEt in ethanol

Answer: E2 (major)

With a secondary substrate, a strong base that is also a nucleophile mainly eliminates.

Which pathway dominates? tert-Butyl bromide + water, warm

Answer: SN1 and E1

A tertiary substrate with a weak nucleophile and weak base ionizes first.

Tosylates, alcohols & simple synthesisTake the quiz (8 questions)

An alcohol reacts with TsCl and pyridine. What happens to the configuration at the carbon bearing oxygen?

Answer: It is retained

Only the O–H bond is broken. The C–O bond is untouched.

(R)-Butan-2-ol is treated with 1) TsCl, pyridine and then 2) NaBr. What is the product?

Answer: (S)-2-Bromobutane

Tosylation retains configuration, then SN2 by bromide inverts it once.

Why does NaBr alone fail to convert an alcohol to an alkyl bromide?

Answer: Hydroxide is too poor a leaving group

Nothing has turned the OH into a weak base that can leave.