Arrow Pushers
← All chapters
8AdAlkene Additions
Chapter 8 notes and study guide

Addition Reactions of Alkenes

Hydrohalogenation, hydration three ways, hydrogenation, halogenation, halohydrins, dihydroxylation and ozonolysis, each with its regiochemistry and stereochemistry.

Notes

7 lessons. Tap a molecule to see it in 3D.

Why alkenes add, and the three questions

The π bond as a nucleophile, and the checklist for predicting any addition product.

An addition reaction is the reverse of an elimination. The π bond breaks, and two new σ bonds form, one to each carbon of the old double bond.

Additions are usually favorable, because one weak π bond and one σ bond are traded for two stronger σ bonds. And they start the same way almost every time: the π electrons are exposed above and below the plane of the alkene, so the alkene acts as a nucleophile and attacks an electrophile.

Three questions for every addition

Every reagent in this chapter is defined by its answers to these.

  • 1. Regiochemistry: which carbon gets which group? If the alkene is unsymmetrical and the two pieces being added are different, the answer is either Markovnikov (the H goes to the carbon that already has more H's, and the other group goes to the more substituted carbon) or anti-Markovnikov (the reverse).
  • 2. Stereochemistry: same face or opposite faces? Syn addition puts both new groups on the same face of the alkene. Anti addition puts them on opposite faces.
  • 3. Is there a carbocation? If there is, expect rearrangements. If the mechanism avoids a free carbocation, there are none.

When you can skip a question

  • If the alkene is symmetrical, or the two groups added are identical (H₂, Br₂), regiochemistry does not matter.
  • If no new chirality centers form, stereochemistry does not matter.
  • If one new chirality center forms from an achiral alkene and achiral reagents, the product is always racemic.
TipMake a table with one row per reagent and three columns: regiochemistry, stereochemistry, rearrangement. The last lesson in this chapter has one filled in. Being able to rebuild it from memory is most of the exam.

Adding H–X and Markovnikov’s rule

Protonation gives the more stable carbocation, and that decides everything.

HCl, HBr and HI add across a double bond to give an alkyl halide. The mechanism has two steps.

H₂CCHCH₃HBrπ bond takes the protonH₃CCH⁺CH₃Br⁻2° carbocation, not 1°H₃CCHCH₃BrMarkovnikov product
  • Step 1. The π bond attacks the H of H–X. This is the slow step, and it produces a carbocation.
  • Step 2. The halide attacks the carbocation.

Markovnikov's rule, and the real reason for it

RuleThe H adds to the alkene carbon that already has more hydrogens. The X ends up on the more substituted carbon.

The reason is the carbocation. The proton can add to either carbon, but it adds so that the more stable carbocation forms, and by the Hammond postulate that pathway is faster. The halide then has no choice about where to go.

HBr

Propene and HBr give 2-bromopropane, not 1-bromopropane.

Stereochemistry and rearrangement

The carbocation is flat, so the halide attacks from either face. A new chirality center is formed as a racemic mixture.

Because there is a carbocation, it can rearrange.

H₃CCCH⁺CH₃CH₃H2° carbocation1,2-hydride shiftH₃CC⁺CH₂CH₃CH₃3° carbocation, more stable
HBr

3-Methyl-1-butene gives mostly 2-bromo-2-methylbutane. The 2° cation rearranges to a 3° cation by a hydride shift before bromide attacks.

The exception: HBr with peroxides

With HBr and a peroxide (ROOR) plus heat or light, the mechanism changes to a radical chain. A bromine atom adds first, to the less substituted carbon, giving the more stable carbon radical. The result is the anti-Markovnikov bromide.

HBr, ROOR
heat or light

Anti-Markovnikov, and no rearrangement.

Exam trapThe peroxide effect works only for HBr. HCl and HI add in the Markovnikov sense whether peroxides are present or not.

Adding water three ways

Acid catalysis, oxymercuration and hydroboration: same alkene, three different alcohols.

Turning an alkene into an alcohol is called hydration. There are three methods, and they exist because each one answers the three questions differently.

MethodReagentsRegiochemistryStereochemistryRearrangement
Acid-catalyzedH₃O⁺ (dilute H₂SO₄)Markovnikovmixtureyes
Oxymercuration–demercuration1. Hg(OAc)₂, H₂O; 2. NaBH₄Markovnikovnot controlledno
Hydroboration–oxidation1. BH₃·THF; 2. H₂O₂, NaOHanti-Markovnikovsynno

The clearest way to see the difference is to run all three on the same alkene, 3-methyl-1-butene.

1. Acid-catalyzed hydration

The alkene is protonated to give a carbocation, water attacks, and a proton is lost. It is the exact reverse of E1 dehydration. Because a carbocation forms, it rearranges when it can.

H₃O⁺

The 2° carbocation shifts to 3°, so the OH ends up on the carbon that was not even part of the double bond.

2. Oxymercuration–demercuration

Mercury adds to the alkene to form a bridged mercurinium ion, not a free carbocation. Water attacks the more substituted carbon of the bridge, and NaBH₄ then replaces the mercury with H. You get the Markovnikov alcohol with no rearrangement.

1. Hg(OAc)₂, H₂O
2. NaBH₄

Markovnikov, and the carbon skeleton is untouched.

3. Hydroboration–oxidation

Borane adds H and BH₂ across the double bond in a single step through a four-membered transition state. Boron goes to the less crowded carbon. Oxidation then swaps the boron for OH in the same position.

‡CCBH₂Hδ⁺four-center transition state (syn)B: less crowded carbonthen H₂O₂, NaOHCCOHHOH takes boron’s place: anti-Markovnikov
1. BH₃·THF
2. H₂O₂, NaOH

Anti-Markovnikov: the OH is on the end carbon.

Because H and B are delivered together from the same side, the addition is syn. On 1-methylcyclohexene this gives the trans alcohol: the H and OH are syn to each other, which places the OH trans to the methyl group.

TipChoosing between them: want Markovnikov with no surprises, use oxymercuration. Want anti-Markovnikov, use hydroboration. Acid-catalyzed hydration is the simplest reagent, but you must check for rearrangement every time.

Syn additions: hydrogenation and dihydroxylation

Reagents that deliver both new groups to the same face.

In a syn addition both new bonds form on the same face of the alkene, usually because both atoms are delivered from a single reagent or surface at once.

Catalytic hydrogenation

H₂ with a metal catalyst (Pt, Pd/C or Ni) converts an alkene into an alkane. The reaction takes place on the surface of the metal. The alkene lies flat on the surface and both hydrogens are transferred to the same face.

H₂, Pd/C

1,2-Dimethylcyclohexene gives cis-1,2-dimethylcyclohexane. Both H's add from one side, which pushes both methyls to the other.

Regiochemistry is not an issue, because the two groups added are identical.

Syn dihydroxylation

Osmium tetroxide adds two OH groups to the same face, giving a cis diol. OsO4 forms a five-membered ring with the two alkene carbons in one step, so both oxygens are necessarily on the same side. It is expensive and toxic, so it is used in small amounts with NMO to regenerate it. Cold, dilute, basic KMnO4 does the same job.

OsO₄ (cat.), NMO

Cyclohexene gives cis-1,2-cyclohexanediol.

Also syn

Hydroboration–oxidation, from the previous lesson, is a syn addition of H and OH.

TipThe word "cis" in a product name for a ring is your signal that a syn addition was used. The word "trans" points to an anti addition.

Anti additions: halogens, halohydrins and epoxide opening

Bridged intermediates force the second group to the opposite face.

In an anti addition, the two new groups end up on opposite faces of the old double bond. The cause is always the same: a three-membered bridged intermediate blocks one face, so the nucleophile has to attack from the other.

Halogenation: Br₂ or Cl₂

CCBrBrπ bond attacks Br–BrCCBrBr⁻+Br⁻ attacks from the far sideCCBrBranti: Br’s on opposite faces

The alkene attacks Br2 and forms a bromonium ion, a three-membered ring with a positively charged bromine. Bromide then attacks a carbon from the back side, as in SN2, and opens the ring. There is no free carbocation, so there is no rearrangement.

Br₂, CH₂Cl₂

Cyclohexene gives trans-1,2-dibromocyclohexane as a racemic pair.

Halohydrin formation: Br₂ in water

When the solvent is water, there is far more water than bromide around, so water opens the bromonium ion. The product has Br on one carbon and OH on the other.

Water attacks the more substituted carbon of the bromonium ion, because that carbon carries more of the positive charge. So the OH goes to the more substituted carbon and Br to the less substituted one.

Br₂, H₂O

1-Methylcyclohexene: OH on the carbon bearing the methyl, Br on the neighbor, anti to each other.

Anti dihydroxylation

A peroxy acid such as mCPBA converts an alkene into an epoxide, a three-membered ring containing oxygen. Aqueous acid then opens the epoxide: water attacks from the back side. The result is a trans diol.

1. mCPBA
2. H₃O⁺

Cyclohexene gives trans-1,2-cyclohexanediol.

Exam trapOsO₄ gives the cis diol and mCPBA followed by H₃O⁺ gives the trans diol. Questions that ask you to choose the reagents for a specific diol are testing exactly this.

Ozonolysis: cutting the double bond

Cleaving C=C into two C=O groups, and working backward from the pieces.

Ozonolysis breaks the carbon–carbon double bond completely. Treatment with ozone (O₃), followed by a mild reducing agent such as dimethyl sulfide (DMS), replaces the C=C with two C=O groups.

RuleErase the double bond, and put a "=O" on each of the two carbons.
1. O₃
2. DMS
+

2-Methyl-2-butene gives acetone and acetaldehyde.

  • An alkene carbon with no hydrogens becomes a ketone.
  • An alkene carbon with one hydrogen becomes an aldehyde.
  • A terminal =CH₂ becomes formaldehyde.

Rings open into a single chain

If the double bond is inside a ring, cutting it does not give two pieces. It gives one chain with a carbonyl at each end.

1. O₃
2. DMS

1-Methylcyclohexene gives a chain with a ketone at one end and an aldehyde at the other.

Working backward

Exams often give you the carbonyl products and ask for the alkene. Reverse the rule: remove the two oxygens and join those two carbons with a double bond. If one compound contains both carbonyl groups, the alkene was in a ring.

TipOzonolysis is the one alkene reaction in this chapter that breaks the σ bond as well as the π bond. Count your carbons before and after. None are lost, they are only separated.

Every alkene addition on one page

The summary table, plus the stereochemistry shortcuts worth memorizing.

ReagentsAddsRegiochemistryStereochemistryRearrangement
HX (HCl, HBr, HI)H and XMarkovnikovmixtureyes
HBr, ROORH and Branti-Markovnikovmixtureno
H₃O⁺H and OHMarkovnikovmixtureyes
1. Hg(OAc)₂, H₂O; 2. NaBH₄H and OHMarkovnikovnot controlledno
1. BH₃·THF; 2. H₂O₂, NaOHH and OHanti-Markovnikovsynno
H₂, Pt or Pd/CH and Hnonesynno
Br₂ or Cl₂X and Xnoneantino
Br₂, H₂OBr and OHOH on more substituted Cantino
OsO₄, NMO (or cold KMnO₄)OH and OHnonesynno
1. mCPBA; 2. H₃O⁺OH and OHnoneantino
1. O₃; 2. DMScleaves C=C to two C=Ononenoneno

Sorting the table in your head

  • Carbocation mechanisms (HX, H₃O⁺): Markovnikov, no stereocontrol, rearrangements. These are the only two that rearrange.
  • Bridged-ion mechanisms (Br₂, Br₂/H₂O, oxymercuration, epoxide opening): anti addition, no rearrangement.
  • Concerted mechanisms (hydroboration, hydrogenation, OsO₄): syn addition, no rearrangement.

Stereochemical outcomes for symmetrical alkenes

When two identical groups are added to an alkene and two new chirality centers form:

AlkeneSyn addition givesAnti addition gives
cismeso compoundracemic pair of enantiomers
transracemic pair of enantiomersmeso compound

For example, Br₂ (anti) adds to cis-2-butene to give the racemic pair of 2,3-dibromobutane, and to trans-2-butene to give the meso compound.

TipWhen a synthesis problem gives you an alkene and a target, first identify what was added. Then use regiochemistry and stereochemistry to pick between the reagents that add those two groups.

Key ideas

The chapter on one page

Why additions happen

  • A π bond is traded for two stronger σ bonds, so ΔH is negative.
  • Two molecules become one, so ΔS is negative.
  • Additions win at low temperature. Eliminations win at high temperature.

Three questions for every addition

  • 1. Regiochemistry: Markovnikov or anti-Markovnikov?
  • 2. Stereochemistry: syn, anti, or no control?
  • 3. Rearrangement: is there a free carbocation?

Markovnikov's rule

  • H adds to the carbon that already has more H's. The other group lands on the more substituted carbon.
  • Real reason: the reaction goes through the more stable carbocation (or the more carbocation-like transition state).

Adding H–X

  • HX (HCl, HBr, HI): Markovnikov. Carbocation intermediate, so rearrangements happen. No stereocontrol.
  • HBr + ROOR (peroxide): anti-Markovnikov by a radical chain. Works for HBr only.

Adding H–OH: three ways

  • H₃O⁺ (dilute H₂SO₄): Markovnikov, carbocation, rearranges.
  • 1) Hg(OAc)₂, H₂O 2) NaBH₄: Markovnikov, no rearrangement (mercurinium ion).
  • 1) BH₃·THF 2) H₂O₂, NaOH: anti-Markovnikov, syn, no rearrangement.

Syn additions

  • H₂ with Pt, Pd or Ni: both H's from the metal surface to the same face.
  • Hydroboration–oxidation: H and OH end up syn.
  • OsO₄ (with NMO) or cold KMnO₄, NaOH: syn diol.
  • Epoxidation with RCO₃H (MCPBA): both C–O bonds form on one face.

Anti additions

  • Br₂ or Cl₂ in CCl₄ or CH₂Cl₂: bromonium ion, then backside attack. Trans dihalide.
  • Br₂, H₂O: halohydrin. OH on the more substituted carbon, anti to Br.
  • 1) RCO₃H 2) H₃O⁺: epoxide, then backside opening by water. Trans diol.

Ozonolysis

  • 1) O₃ 2) DMS (or Zn, H₂O): cuts the C=C and caps each carbon with =O.
  • A carbon with one H becomes an aldehyde. A carbon with no H becomes a ketone. A =CH₂ becomes formaldehyde.
  • Work backward by erasing the two O's and joining the carbons.

Stereo outcomes worth memorizing

  • cis alkene + syn addition of two identical groups → meso. cis alkene + anti → racemic pair.
  • trans alkene + syn → racemic pair. trans alkene + anti → meso.
  • Any addition that makes one new chirality center from achiral materials gives a racemic mixture.

Flashcards

55 cards

Reagents → productDrill this deck

PromptAnswer
Alkene + HBrAlkyl bromide, Markovnikov. Carbocation intermediate.
Alkene + HBr, ROORAlkyl bromide, anti-Markovnikov. Radical chain.
Alkene + H₃O⁺ (dilute H₂SO₄)Alcohol, Markovnikov. Rearrangements possible.
Alkene + 1) Hg(OAc)₂, H₂O 2) NaBH₄Alcohol, Markovnikov, no rearrangement (oxymercuration–demercuration)
Alkene + 1) Hg(OAc)₂, ROH 2) NaBH₄Ether, Markovnikov (alkoxymercuration)
Alkene + 1) BH₃·THF 2) H₂O₂, NaOHAlcohol, anti-Markovnikov, syn addition of H and OH
Alkene + H₂, Pt (or Pd/C, Ni)Alkane, by syn addition
Alkene + Br₂ in CCl₄Vicinal dibromide, anti addition
Alkene + Br₂, H₂OBromohydrin. OH on the more substituted carbon, anti to Br.
Alkene + RCO₃H (MCPBA)Epoxide
Alkene + 1) RCO₃H 2) H₃O⁺Trans 1,2-diol (anti dihydroxylation)
Alkene + OsO₄ (cat.), NMOCis 1,2-diol (syn dihydroxylation)
Alkene + cold KMnO₄, NaOHCis 1,2-diol (syn dihydroxylation)
Alkene + 1) O₃ 2) DMSC=C cleaved into two C=O groups (aldehydes and/or ketones)
Alkene + H⁺, CH₃OHMethyl ether, Markovnikov (acid-catalyzed addition of an alcohol)
What does 9-BBN or disiamylborane offer over BH₃?Bulkier boranes: even higher anti-Markovnikov selectivity
Alkene + Cl₂, H₂OChlorohydrin. OH on the more substituted carbon, anti.
Alkene + HCl or HIAlkyl halide, Markovnikov
Alcohol + conc. H₂SO₄, heatAlkene. The reverse of hydration.
What do DMS, Zn/H₂O and (CH₃)₂S do after O₃?Reductive workup: they convert the ozonide to aldehydes and ketones.

Regiochemistry & stereochemistry factsDrill this deck

PromptAnswer
Markovnikov's ruleH goes to the alkene carbon with more H's; the other group goes to the more substituted carbon.
Why Markovnikov?Protonation gives the more stable, more substituted carbocation.
Anti-MarkovnikovThe non-hydrogen group ends up on the less substituted carbon.
Syn additionBoth new groups add to the same face of the alkene.
Anti additionThe two new groups add to opposite faces.
Which additions are syn?Hydrogenation, hydroboration–oxidation, OsO₄ or KMnO₄ dihydroxylation, epoxidation
Which additions are anti?Halogenation, halohydrin formation, and epoxide opening (anti dihydroxylation)
Which additions can rearrange?HX addition and acid-catalyzed hydration. Both have free carbocations.
Which hydration avoids rearrangement but stays Markovnikov?Oxymercuration–demercuration
Which hydration is anti-Markovnikov?Hydroboration–oxidation
ΔH and ΔS of an addition reactionBoth negative. Favored at low temperature.
cis-But-2-ene + Br₂Racemic (2R,3R) and (2S,3S)-2,3-dibromobutane
trans-But-2-ene + Br₂meso-2,3-Dibromobutane
cis-But-2-ene + OsO₄meso-Butane-2,3-diol
trans-But-2-ene + OsO₄Racemic butane-2,3-diol
Cyclohexene + Br₂trans-1,2-Dibromocyclohexane (racemic)
1-Methylcyclohexene + BH₃ then H₂O₂, NaOHtrans-2-Methylcyclohexanol (racemic). H and OH are syn, so CH₃ and OH end up trans.
How to favor alcohol over alkene in acid-catalyzed hydrationDilute acid (lots of water) and low temperature. Concentrated acid and heat push back to the alkene.
More stable alkene: larger or smaller heat of hydrogenation?Smaller. It starts lower in energy.
Does HCl + ROOR give anti-Markovnikov addition?No. The peroxide effect works only for HBr.

Mechanism detailsDrill this deck

PromptAnswer
Steps of HX addition1) Alkene π bond takes H⁺, giving a carbocation. 2) Halide attacks the carbocation.
Rate-determining step of HX additionProtonation of the alkene to form the carbocation
Steps of acid-catalyzed hydration1) Protonate the alkene. 2) Water attacks the carbocation. 3) Deprotonate the oxonium ion.
Intermediate in oxymercurationA bridged mercurinium ion. Water opens it at the more substituted carbon.
Hydroboration transition stateConcerted and four-membered: C–H and C–B bonds form together on the same face.
Why does boron go to the less substituted carbon?Less steric crowding, and the developing partial positive charge sits on the more substituted carbon.
What happens in the oxidation step of hydroboration?C–B is replaced by C–OH with retention of configuration.
Intermediate in halogenationA bridged halonium (bromonium or chloronium) ion
Why is halogenation anti?The halide attacks the halonium ion from the back, opposite the bridge.
Why does water attack the more substituted carbon of a bromonium ion?That carbon carries more of the positive charge.
How does hydrogenation deliver syn addition?H₂ and the alkene bind to the metal surface, and both H atoms transfer to the same face.
HBr/ROOR: which species adds to the alkene first?A bromine radical. It adds to the less substituted carbon to give the more stable carbon radical.
Acid-catalyzed epoxide openingProtonate the epoxide oxygen, then water attacks from the back at the more substituted carbon.
Syn dihydroxylation mechanismConcerted addition of OsO₄ gives a cyclic osmate ester, which is cleaved to the cis diol.
Homogeneous hydrogenation catalystWilkinson's catalyst, (Ph₃P)₃RhCl. It dissolves in the reaction mixture and also gives syn addition.

Practice questions

A sample of the 64 in this chapter. Open one to check your answer.

Hydrohalogenation & acid-catalyzed hydrationTake the quiz (12 questions)

Propene reacts with HBr. What is the major product?

Answer: 2-Bromopropane

Markovnikov addition through the secondary carbocation.

Why does HX add with Markovnikov regiochemistry?

Answer: Protonation gives the more stable carbocation

The lower-energy carbocation forms faster, and the halide then attacks it.

But-1-ene reacts with HBr in the presence of peroxides (ROOR). What is the major product?

Answer: 1-Bromobutane

Peroxides switch the mechanism to a radical chain, which gives anti-Markovnikov addition.

Oxymercuration & hydroborationTake the quiz (11 questions)

Which reagents carry out oxymercuration–demercuration?

Answer: 1) Hg(OAc)₂, H₂O 2) NaBH₄

Mercuric acetate adds with water, then sodium borohydride replaces mercury with hydrogen.

What is the main advantage of oxymercuration over acid-catalyzed hydration?

Answer: No carbocation rearrangements

The bridged mercurinium ion never becomes a free carbocation.

3,3-Dimethylbut-1-ene is treated with 1) Hg(OAc)₂, H₂O 2) NaBH₄. What forms?

Answer: 3,3-Dimethylbutan-2-ol

Markovnikov OH with the carbon skeleton intact.

Hydrogenation, halogenation & halohydrinsTake the quiz (11 questions)

What is the stereochemistry of catalytic hydrogenation?

Answer: Syn addition

Both hydrogens are delivered from the metal surface to the same face.

1,2-Dimethylcyclohexene is treated with H₂ and Pt. What is the major product?

Answer: cis-1,2-Dimethylcyclohexane

Syn addition of two H's pushes both methyl groups to the other face, so they end up cis.

How does the metal catalyst speed up hydrogenation?

Answer: It lowers the activation energy by binding H₂ and the alkene

A catalyst changes the pathway, not the thermodynamics.

Dihydroxylation, epoxides & ozonolysisTake the quiz (12 questions)

Which reagents give syn dihydroxylation?

Answer: OsO₄ (cat.), NMO

Osmium tetroxide adds both oxygens to one face in a concerted step. Cold KMnO₄, NaOH does the same.

Which reagents give anti dihydroxylation?

Answer: 1) RCO₃H 2) H₃O⁺

Epoxidation, then backside opening of the protonated epoxide by water.

Cyclopentene is treated with OsO₄ and NMO. What is the product?

Answer: cis-Cyclopentane-1,2-diol (meso)

Syn addition puts both OH groups on the same face.

Choose the reagentsTake the quiz (11 questions)

Convert 1-methylcyclohexene into 1-methylcyclohexanol.

Answer: H₃O⁺

Markovnikov hydration. Oxymercuration would also work.

Convert 1-methylcyclohexene into trans-2-methylcyclohexanol.

Answer: 1) BH₃·THF 2) H₂O₂, NaOH

Anti-Markovnikov, syn addition of H and OH.

Convert 1-methylcyclohexene into 1-bromo-1-methylcyclohexane.

Answer: HBr

Markovnikov addition of HBr.