Arrow Pushers
← All chapters
9AkAlkynes & Synthesis
Chapter 9 notes and study guide

Alkynes and an Introduction to Synthesis

Alkyne acidity, preparation, reduction, hydration, alkylation, and how to chain reactions together into a synthesis.

Notes

7 lessons. Tap a molecule to see it in 3D.

Alkyne structure and acidity

Linear geometry, and the surprisingly acidic hydrogen on a terminal alkyne.

An alkyne contains a carbon–carbon triple bond: one σ bond and two π bonds at right angles to each other. Both carbons are sp hybridized, so the triple bond and the two atoms attached to it lie in a straight line.

acetylene: all four atoms in a line
2-butyne: the four carbons are collinear

Drag a model to rotate it.

  • A terminal alkyne has the triple bond at the end of a chain, so it has a hydrogen on an sp carbon.
  • An internal alkyne has carbon groups on both sides and no such hydrogen.
1-butyne: terminal
2-butyne: internal

Terminal alkynes are acidic

The hydrogen on an sp carbon has a pKa of about 25. That is far more acidic than an alkene C–H (44) or an alkane C–H (50). The reason is the "O" in ARIO: the conjugate base keeps its lone pair in an sp orbital, which has 50% s-character and holds the electrons close to the nucleus.

AcidpKaCan its base deprotonate an alkyne?
H₂O (base: HO⁻)15.7no
ROH (base: RO⁻)16 to 18no
RC≡C–H25n/a
H₂ (base: NaH)35yes
NH₃ (base: NaNH₂)38yes

A pKa of 25 is still a very weak acid. Hydroxide and alkoxides are not strong enough. You need sodium amide (or NaH), whose conjugate acid is weaker than the alkyne.

NaNH₂

Propyne gives an acetylide ion (an alkynide). It is a strong base and an excellent carbon nucleophile.

Exam trapOnly terminal alkynes can be deprotonated this way. An internal alkyne has no acidic hydrogen, so NaNH₂ does nothing useful to it.

Making alkynes by double elimination

Two E2 reactions in a row turn a dihalide into a triple bond.

An alkyne can be made by removing two molecules of HX from a dihalide. Each removal is an E2 reaction, and the base is sodium amide, NaNH2.

  • A vicinal dihalide has the two halogens on neighboring carbons.
  • A geminal dihalide has both halogens on the same carbon.

Either one works.

excess NaNH₂

2,3-Dibromobutane (vicinal) gives 2-butyne. The first E2 gives a vinyl bromide and the second gives the alkyne.

Terminal alkynes need a third equivalent

If the product is a terminal alkyne, its acidic hydrogen is immediately removed by the strong base. So you need three equivalents of NaNH₂ (two for the eliminations and one that is consumed deprotonating the product), followed by water to put the proton back.

1. excess NaNH₂
2. H₂O

1,2-Dibromobutane gives 1-butyne after the water workup.

From an alkene to an alkyne

Vicinal dihalides come from adding Br₂ to an alkene. So this two-step sequence turns a double bond into a triple bond:

1. Br₂
2. excess NaNH₂

Add Br₂ across the double bond, then eliminate twice.

TipThis sequence is a standard synthesis move. If your target has a triple bond where the starting material has a double bond, think Br₂ followed by excess NaNH₂.

Reducing alkynes

All the way to the alkane, or stopping at the cis or the trans alkene.

An alkyne has two π bonds, so it can add two equivalents of H₂. The reagents let you choose where to stop and which alkene geometry you get.

Complete reduction

H₂ (excess), Pt or Pd/C

An ordinary catalyst cannot stop at the alkene. You get the alkane.

To the cis alkene: Lindlar's catalyst

Lindlar's catalyst is palladium that has been deliberately "poisoned" so that it is active enough to reduce an alkyne but not an alkene. Hydrogenation happens on the metal surface, so both hydrogens add to the same face (syn). The product is the cis (Z) alkene. Ni₂B does the same job.

H₂, Lindlar's catalyst

2-Butyne gives cis-2-butene.

To the trans alkene: dissolving metal reduction

Sodium metal in liquid ammonia adds the hydrogens one at a time through radical and anion intermediates. The intermediate vinyl radical prefers the arrangement with the two large groups far apart, so the product is the trans (E) alkene. This is an anti addition.

Na, NH₃ (l)

2-Butyne gives trans-2-butene.

ReagentsProductAddition
H₂, Pt or Pd/Calkaneboth π bonds reduced
H₂, Lindlar's catalystcis alkenesyn
Na, NH₃ (l)trans alkeneanti
Exam trapNa/NH₃ (sodium metal in ammonia) is a reducing agent. NaNH₂ (sodium amide) is a strong base. They look alike on the page and do completely different things.

Hydrating alkynes and tautomers

Adding water gives an enol, which immediately becomes a ketone or an aldehyde.

Adding water across a triple bond puts an OH on a double-bonded carbon. That structure is called an enol (ene + ol), and it is not stable. It rearranges at once into a carbonyl compound.

tautomerization

An enol and its ketone. A hydrogen moves from O to C and the π bond moves from C=C to C=O.

The enol and the ketone are tautomers: constitutional isomers that interconvert rapidly by moving a hydrogen and a π bond. The equilibrium strongly favors the keto form, because a C=O bond is much stronger than a C=C bond.

Exam trapTautomers are not resonance structures. In resonance only electrons move. In tautomerization a hydrogen atom moves, so they are different compounds.

Markovnikov hydration: a ketone

With HgSO₄ and H₂SO₄ in water, the OH adds to the more substituted carbon. A terminal alkyne gives a methyl ketone.

HgSO₄, H₂SO₄, H₂O

1-Butyne gives 2-butanone.

Anti-Markovnikov hydration: an aldehyde

Hydroboration–oxidation puts the OH on the less substituted carbon. A terminal alkyne gives an aldehyde. A bulky borane (9-BBN or disiamylborane) is used so that it adds only once.

1. 9-BBN
2. H₂O₂, NaOH

1-Butyne gives butanal.

Internal alkynes

A symmetrical internal alkyne gives a single ketone by either method. An unsymmetrical internal alkyne gives a mixture of two ketones, so it is not a useful reaction.

TipTerminal alkyne plus Hg²⁺ gives a ketone. Terminal alkyne plus a borane gives an aldehyde. That pair is asked about constantly.

Other additions to alkynes

HX, halogens and ozonolysis: the alkene reactions, done once or twice.

Alkynes undergo most of the addition reactions of alkenes. The difference is that there are two π bonds, so the reaction can happen once or twice depending on how much reagent you use.

Adding HX

One equivalent of HX adds in the Markovnikov sense to give a vinyl halide. A second equivalent adds to the same carbon, giving a geminal dihalide with both halogens on one carbon.

HBr (1 equiv)

Propyne gives 2-bromopropene.

HBr (excess)

With excess HBr, both bromines end up on the same carbon.

Adding X₂

One equivalent of Br₂ or Cl₂ gives mainly the trans dihaloalkene (anti addition). Excess gives the tetrahalide.

Br₂ (1 equiv)

2-Butyne gives the E dibromoalkene.

Ozonolysis

Ozone followed by water cleaves the triple bond completely. Each alkyne carbon becomes a carboxylic acid. A terminal alkyne carbon is lost as CO₂.

1. O₃
2. H₂O
+

2-Butyne gives two molecules of acetic acid.

TipCompare with alkenes: ozonolysis of an alkene gives aldehydes and ketones, while ozonolysis of an alkyne gives carboxylic acids.

Alkylation: building carbon chains

The first carbon–carbon bond-forming reaction of the course.

An acetylide ion is a strong carbon nucleophile. It attacks a methyl or primary alkyl halide in an SN2 reaction and forms a new C–C bond. This is how a small molecule is built into a larger one.

1. NaNH₂
2. CH₃CH₂Br

Propyne is deprotonated, then the acetylide displaces bromide from bromoethane to give 2-pentyne.

The substrate limitation

Acetylide ions are also strong bases. The rules from Chapter 7 apply directly:

  • Methyl and primary halides: SN2, and the alkylation works well.
  • Secondary and tertiary halides: E2 wins. The acetylide removes a β hydrogen, and you get an alkene and the alkyne back.
Exam trapYou cannot attach a secondary or tertiary carbon to an alkyne by alkylation. If a synthesis seems to need that, the bond has to be made the other way round, or by a different route.

Alkylating twice

Acetylene has two acidic hydrogens, so it can be alkylated on both sides, one after the other. Each alkylation needs its own equivalent of base.

1. NaNH₂
2. CH₃I

First alkylation: acetylene to propyne.

1. NaNH₂
2. CH₃CH₂Br

Second alkylation: propyne to 2-pentyne.

The two steps cannot be combined into one pot with both halides present. Deprotonate, alkylate, then repeat.

Introduction to synthesis

Working backward from the target, with a worked example.

A synthesis problem gives you a starting material and a target and asks for the reagents in between. There is rarely a single step that does it, so you need a strategy.

Think backward: retrosynthesis

Start from the target and ask: what could I make this from in one step? Then ask the same question about that compound, and keep going until you reach the starting material.

Ask two questions about each step:

  • Does the carbon skeleton change? If the target has more carbons, you need a C–C bond-forming reaction. So far that means alkylating an acetylide.
  • Does the functional group change? Its identity, its position or its stereochemistry?

Worked example: cis-2-pentene from acetylene

The target has five carbons and acetylene has two, so carbons must be added. The target is a cis alkene, and the reagent that makes a cis alkene is H₂ with Lindlar's catalyst acting on an alkyne. So the step before the target is 2-pentyne. And 2-pentyne is acetylene with a methyl on one side and an ethyl on the other: two alkylations.

1. NaNH₂
2. CH₃I

Step 1: add a methyl group.

1. NaNH₂
2. CH₃CH₂Br

Step 2: add an ethyl group.

H₂, Lindlar's catalyst

Step 3: reduce to the cis alkene. Using Na/NH₃ here would give the trans isomer.

Moves to keep in your toolbox

GoalSequence
Move a leaving group to the neighboring carboneliminate (E2), then add HBr (Markovnikov) or HBr/ROOR (anti-Markovnikov)
Move a double bondadd HBr, then eliminate with a small base (Zaitsev) or a bulky base (Hofmann)
Move an OHTsCl, then a base to make the alkene, then the right hydration
Alkene to alkyneBr₂, then excess NaNH₂
Alkyne to cis or trans alkeneLindlar, or Na/NH₃
Add carbonsNaNH₂, then a methyl or primary halide
TipWrite the structure after every step, even the obvious ones. Most lost marks in synthesis come from a reagent that would also react somewhere else in the molecule, and you only notice that when the intermediate is drawn.

Key ideas

The chapter on one page

Terminal alkynes are acidic

  • pKa ≈ 25, because the acetylide lone pair sits in an sp orbital (50% s-character).
  • NaNH₂ (or NaH) deprotonates them completely. NaOH cannot.
  • The acetylide ion is a strong nucleophile and a strong base.

Making alkynes

  • Two E2 eliminations from a dihalide, vicinal (neighboring carbons) or geminal (same carbon).
  • Reagents: 1) excess NaNH₂ 2) H₂O. For a terminal alkyne use 3 equivalents; the third deprotonates the product and water puts the H back.
  • From an alkene: 1) Br₂ 2) xs NaNH₂ 3) H₂O.

Reducing alkynes

  • H₂, Pt (or Pd/C, Ni): all the way to the alkane.
  • H₂, Lindlar's catalyst (or Ni₂B): stops at the cis alkene (syn addition).
  • Na, NH₃(l): trans alkene, through a radical anion (anti addition).

Hydrating alkynes

  • HgSO₄, H₂SO₄, H₂O: Markovnikov. Enol → ketone. A terminal alkyne gives a methyl ketone.
  • 1) R₂BH (9-BBN or disiamylborane) 2) H₂O₂, NaOH: anti-Markovnikov. Enol → aldehyde from a terminal alkyne.
  • Enol and ketone are tautomers: constitutional isomers that interconvert by moving an H and a π bond. Keto wins.

Other additions

  • HX: 1 equivalent gives a Markovnikov vinyl halide; excess gives a geminal dihalide.
  • X₂: 1 equivalent gives a dihaloalkene (mostly trans); excess gives a tetrahalide.
  • 1) O₃ 2) H₂O: cleaves C≡C to carboxylic acids. A terminal carbon leaves as CO₂.

Alkylation: building carbon chains

  • 1) NaNH₂ 2) R–X makes a new C–C bond by SN2.
  • R–X must be methyl or primary. With 2° or 3° halides the acetylide acts as a base and you get E2.
  • Acetylene can be alkylated twice, one side at a time.

Synthesis moves

  • Move a leaving group: eliminate, then add HBr (Markovnikov) or HBr/ROOR (anti-Markovnikov).
  • Move a π bond: add HBr, then eliminate with the right base (small for Zaitsev, bulky for Hofmann).
  • Move an OH: make the alkene (via tosylate + base), then pick the right hydration.
  • Work backward from the target (retrosynthesis): what could make this in one step?

Flashcards

39 cards

Alkyne reactionsDrill this deck

PromptAnswer
pKa of a terminal alkyneAbout 25
Base used to deprotonate a terminal alkyneNaNH₂ (or NaH). The conjugate acid must have pKa well above 25.
Why is a terminal alkyne more acidic than an alkene?The conjugate base's lone pair is in an sp orbital, held closer to the nucleus.
Vicinal versus geminal dihalideVicinal: halogens on adjacent carbons. Geminal: both on the same carbon.
Dihalide + 1) xs NaNH₂ 2) H₂OAlkyne, by two successive E2 eliminations
Alkyne + H₂, PtAlkane (two equivalents of H₂ add)
Alkyne + H₂, Lindlar's catalystcis-Alkene (syn addition, stops after one H₂)
Alkyne + Na, NH₃(l)trans-Alkene (dissolving metal reduction)
What is Lindlar's catalyst?A poisoned palladium catalyst (Pd on CaCO₃ with lead acetate and quinoline). Ni₂B (P-2) behaves the same way.
Intermediate in the Na/NH₃ reductionA radical anion. The trans geometry is set when the vinyl anion forms.
Terminal alkyne + HgSO₄, H₂SO₄, H₂OMethyl ketone (Markovnikov hydration through an enol)
Terminal alkyne + 1) 9-BBN or disiamylborane 2) H₂O₂, NaOHAldehyde (anti-Markovnikov hydration through an enol)
Why use R₂BH rather than BH₃ on an alkyne?The bulky borane adds only once and gives better regioselectivity.
TautomersConstitutional isomers that interconvert rapidly by shifting a proton and a π bond, such as an enol and a ketone
Are an enol and its ketone resonance structures?No. An atom (H) moves, so they are distinct compounds in equilibrium. The keto form is favored.
Alkyne + excess HBrGeminal dibromide (both Br on the more substituted carbon)
Alkyne + 1 equivalent HBrVinyl bromide, Markovnikov
Alkyne + excess Br₂Tetrabromide
Internal alkyne + 1) O₃ 2) H₂OTwo carboxylic acids
Terminal alkyne + 1) O₃ 2) H₂OA carboxylic acid and CO₂
Terminal alkyne + 1) NaNH₂ 2) CH₃IInternal alkyne with a new C–C bond (alkylation by SN2)
Which alkyl halides work in acetylide alkylation?Methyl and primary only. Secondary and tertiary give E2.

Synthesis toolboxDrill this deck

PromptAnswer
RetrosynthesisPlanning a synthesis backward from the target, one step at a time
Alkene → alkyne1) Br₂ 2) xs NaNH₂ 3) H₂O
Alkyne → cis alkeneH₂, Lindlar's catalyst
Alkyne → trans alkeneNa, NH₃(l)
Alkyl halide → Zaitsev alkeneNaOEt or NaOMe (strong, small base)
Alkyl halide → Hofmann alkenet-BuOK (strong, bulky base)
Alcohol → alkene without rearrangement1) TsCl, pyridine 2) a strong base (E2)
Alkene → Markovnikov alcohol, no rearrangement1) Hg(OAc)₂, H₂O 2) NaBH₄
Alkene → anti-Markovnikov alcohol1) BH₃·THF 2) H₂O₂, NaOH
Alkene → anti-Markovnikov bromideHBr, ROOR
Move Br from C1 to C2 of a chain1) t-BuOK (E2 to the alkene) 2) HBr (Markovnikov)
Move Br from C2 to C1 of a chain1) t-BuOK (Hofmann alkene) 2) HBr, ROOR
Add carbons to a terminal alkyne1) NaNH₂ 2) methyl or primary alkyl halide
Terminal alkyne → methyl ketoneHgSO₄, H₂SO₄, H₂O
Terminal alkyne → aldehyde1) 9-BBN (or disiamylborane) 2) H₂O₂, NaOH
Alcohol → nitrile, azide, thiol or ether with inversion1) TsCl, pyridine 2) the nucleophile (SN2)
Change the carbon skeleton or just the functional group?Ask this first. Only C–C bond-forming steps (such as acetylide alkylation) change the skeleton.

Practice questions

A sample of the 38 in this chapter. Open one to check your answer.

Alkyne acidity & preparationTake the quiz (8 questions)

What is the approximate pKa of a terminal alkyne?

Answer: 25

It is far more acidic than an alkene (44) or alkane (50), but far less than water.

Which base deprotonates a terminal alkyne completely?

Answer: NaNH₂

The conjugate acid, NH₃, has pKa 38, well above 25.

Why is a terminal alkyne more acidic than an alkene?

Answer: The acetylide lone pair is in an sp orbital

This is the O of ARIO: more s-character stabilizes the negative charge.

Alkyne reductions & additionsTake the quiz (12 questions)

Hex-3-yne is treated with H₂ and Lindlar's catalyst. What is the product?

Answer: (Z)-Hex-3-ene

The poisoned catalyst stops after one syn addition of H₂.

Hex-3-yne is treated with Na in liquid NH₃. What is the product?

Answer: (E)-Hex-3-ene

Dissolving metal reduction gives anti addition of two H atoms.

Hex-3-yne is treated with H₂ and Pt. What is the product?

Answer: Hexane

An ordinary catalyst reduces the alkyne all the way.

Alkylation & synthesisTake the quiz (12 questions)

An acetylide ion reacts with CH₃I by which mechanism?

Answer: SN2

The acetylide is a strong nucleophile attacking an unhindered methyl carbon.

Sodium acetylide is mixed with 2-bromopropane. What mainly happens?

Answer: E2 elimination to propene

Acetylides are strong bases. With secondary halides elimination wins.

Acetylene is treated with 1) NaNH₂ 2) CH₃CH₂Br 3) NaNH₂ 4) CH₃I. What is the product?

Answer: Pent-2-yne

An ethyl group goes on one side and a methyl on the other: CH₃C≡CCH₂CH₃.