Arrow Pushers
← All chapters
4CfNaming & Conformations
Chapter 4 notes and study guide

Alkanes, Nomenclature and Conformations

IUPAC names, Newman projections, torsional and steric strain, and cyclohexane chairs.

Notes

6 lessons. Tap a molecule to see it in 3D.

Naming alkanes step by step

Parent chain, numbering, substituents, alphabetical order. A worked example for each step.

An IUPAC name has three parts: substituents + parent + suffix. For alkanes the suffix is -ane, and the parent tells you how many carbons are in the main chain.

Carbons12345678910
Parentmethethpropbutpenthexheptoctnondec

The four moves

  • 1. Find the parent. It is the longest continuous carbon chain, which is often not the one drawn straight across. If two chains tie, pick the one with more substituents.
  • 2. Number the chain from the end that gives the first substituent the lowest number. If that ties, go to the next substituent.
  • 3. Name each substituent with its position number. Use di, tri and tetra when a group appears more than once, and give every copy its own number.
  • 4. Alphabetize the substituents. Ignore di, tri, sec and tert when alphabetizing. Do count iso and cyclo.

Worked example

2,2,4-trimethylhexane

Longest chain: six carbons, so hexane. Numbering from the right gives methyls at 2, 2 and 4. Numbering from the left would give 3, 5 and 5, which loses at the first number.

Branched substituents you must recognize

isopropyl bromide
isobutyl bromide
sec-butyl bromide
tert-butyl bromide

Shown attached to Br so you can see the point of attachment. "sec" attaches through a 2° carbon and "tert" through a 3° carbon.

Rings

A ring is named with the prefix cyclo. If the ring has more carbons than any chain attached to it, the ring is the parent. With one substituent no number is needed. With two or more, number around the ring to give the lowest set, starting with the group that comes first alphabetically.

methylcyclohexane
1-ethyl-2-methylcyclohexane
Exam trapPunctuation is graded. Commas go between numbers, hyphens go between numbers and letters, and the name is one word: 2,2,4-trimethylhexane.

Naming with functional groups

How an OH, a C=C or a C=O changes the suffix and takes over the numbering.

When a molecule has a functional group, the group replaces the -ane ending and gets priority in numbering. The parent chain must contain the group, even if a longer chain exists elsewhere.

GroupSuffixExample
Carboxylic acid-oic acidpropanoic acid
Aldehyde-alpropanal
Ketone-one2-butanone
Alcohol-ol2-butanol
Alkene-ene1-butene
Alkyne-yne1-butyne
Halidenamed as a substituent (bromo, chloro)2-bromobutane

The table is in priority order. If a molecule has two of these groups, the one higher in the list gets the suffix and the lowest number. The other is named as a substituent (an OH that loses becomes "hydroxy").

3-methyl-2-butanol: OH gets the lower number
2-methyl-1-butene: number through the C=C
4-methyl-2-pentanone

Points that cost marks

  • The position number of the group goes right before the parent or right before the suffix. 2-butanol and butan-2-ol are both accepted.
  • A double bond is numbered by its first carbon. A C=C between C2 and C3 is a 2-ene.
  • Halogens never get the suffix. They are always substituents and are alphabetized with the alkyl groups.
  • Aldehydes and carboxylic acids are always at the end of a chain, so that carbon is C1 and the number is left out.

Conformations and Newman projections

Rotation around single bonds, the strain it creates, and how to rank conformers by energy.

Single bonds rotate freely, so a molecule constantly changes shape. These shapes are called conformations. They are not different compounds, since no bonds are broken, but they do differ in energy.

A Newman projection looks straight down one C–C bond. The front carbon is the dot where three bonds meet. The back carbon is the circle, with its three bonds coming out from the edge.

HHHHHHStaggeredlowest energyHHHHHHEclipsed+12 kJ/mol (torsional strain)
Ethane. In the eclipsed form the back hydrogens are directly behind the front ones (they are drawn slightly offset so you can see them).

Two kinds of strain

  • Torsional strain: the cost of eclipsing bonds. Electrons in the lined-up bonds repel. Each H/H eclipse costs about 4 kJ/mol, so eclipsed ethane is 12 kJ/mol above staggered.
  • Steric strain: two groups trying to occupy the same space. This appears as soon as groups larger than H are involved.

Butane has more than two options

Looking down the C2–C3 bond of butane, each carbon carries one CH₃ and two H's. The angle between the two methyl groups (the dihedral angle) sets the energy.

CH₃HHCH₃HHAnti0 kJ/mol · most stableCH₃HHCH₃HHGauche+3.8 kJ/mol (steric)CH₃HHCH₃HHEclipsed, CH₃ over CH₃+19 kJ/mol · least stable
anti: methyls 180° apart
gauche: methyls 60° apart
eclipsed: methyls collide

The same three conformers as real 3D models. Rotate them to look down the central bond.

EnergyDihedral angle between the two CH₃ groups0°60°120°180°240°300°360°eclipsed 19gauche 3.8eclipsed 16anti 0eclipsed 16gauche 3.8
One full rotation. Staggered conformers are the valleys and eclipsed conformers are the peaks.
InteractionCost (kJ/mol)
H / H eclipsed4
CH₃ / H eclipsed6
CH₃ / CH₃ eclipsed11
CH₃ / CH₃ gauche3.8
TipTo find the most stable conformer of any molecule, draw a staggered Newman projection and put the two largest groups anti to each other. To find the least stable, eclipse the two largest groups.

Cycloalkanes and ring strain

Why three- and four-membered rings are strained and six-membered rings are not.

An sp³ carbon wants bond angles of 109.5°. Forcing it into a small ring bends those angles, and a flat ring also eclipses every C–H bond. The total is called ring strain.

  • Angle strain: bond angles pushed away from 109.5°.
  • Torsional strain: eclipsed bonds around the ring.
cyclopropane: 60° angles, all H eclipsed
cyclobutane: about 88°, slightly puckered
cyclopentane: envelope shape
cyclohexane: chair, no strain

Drag a model to rotate it.

Ring by ring

Cyclopropane has to be flat, because three points define a plane. Its angles are 60° and every hydrogen is eclipsed. It is the most strained common ring, and its C–C bonds are weak and unusually reactive.

Cyclobutane would have 90° angles if flat. It puckers slightly to relieve some eclipsing, at the cost of a little more angle strain.

Cyclopentane has almost no angle strain when flat (108°), but a flat ring would eclipse ten C–H bonds. It bends one corner out of the plane into an "envelope" to avoid that.

Cyclohexane is the special one. In its chair conformation every angle is close to 109.5° and every bond is staggered. It has essentially zero ring strain, which is why six-membered rings are everywhere in nature.

TipRing strain order: cyclopropane > cyclobutane > cyclopentane > cyclohexane ≈ 0. More strain means more energy released when the ring opens or burns.

The cyclohexane chair

Axial and equatorial positions, the ring flip, and why big groups go equatorial.

In a chair, each carbon has two positions for its substituents.

  • Axial: straight up or straight down, parallel to an imaginary axis through the ring. They alternate up, down, up, down around the ring.
  • Equatorial: pointing outward around the "equator" of the ring, angled slightly up or down.
aeaeaeaeaeaea = axial: straight up or downe = equatorial: out to the side
Six axial bonds (three up, three down) and six equatorial bonds.
cyclohexane chair

Rotate it to look from the side. The hydrogens pointing straight up and down are axial.

The ring flip

A chair can flip into a second chair. In the flip, every axial position becomes equatorial and every equatorial becomes axial. What does not change is whether a group points up or down: an "up" group stays up.

CH₃HHCH₃ring flipAxial CH₃: crowds the two axial H’s1,3-diaxial strain, +7.6 kJ/molEquatorial CH₃: points away from the ringfavored, about 95% at room temperature

Why substituents prefer equatorial

An axial group sits close to the two other axial hydrogens on the same side of the ring, at the carbons two positions away. These clashes are called 1,3-diaxial interactions. They are a form of steric strain, the same thing as a gauche interaction in butane.

axial methyl: crowded
equatorial methyl: favored

Drag a model to rotate it.

An axial methyl costs 7.6 kJ/mol, so about 95% of methylcyclohexane molecules have the methyl equatorial at room temperature. The larger the group, the stronger the preference. A tert-butyl group is so large that the ring is effectively locked with it equatorial.

Exam trapAxial and equatorial describe direction relative to the ring. Up and down describe which face of the ring. They are independent. After a ring flip a group changes from axial to equatorial but is still on the same face.

Disubstituted cyclohexanes: cis and trans

Working out which chair is more stable when the ring carries two groups.

With two substituents, cis means both point to the same face of the ring (both up or both down) and trans means opposite faces. Cis and trans isomers are different compounds. A ring flip cannot turn one into the other.

The method

  • Draw a chair and place the two groups using up and down, according to cis or trans.
  • Note whether each lands axial or equatorial.
  • Flip the ring. Every axial becomes equatorial and vice versa.
  • The better chair has the most (and largest) groups equatorial.

The pattern to memorize

Positionscis givestrans givesMore stable isomer
1,2one axial, one equatorialboth equatorial (or both axial)trans
1,3both equatorial (or both axial)one axial, one equatorialcis
1,4one axial, one equatorialboth equatorial (or both axial)trans

Axial positions alternate up and down around the ring, so neighbors (1,2) that are both equatorial must be on opposite faces. Move one more carbon over (1,3) and the pattern reverses.

trans-1,2-dimethylcyclohexane: both equatorial
cis-1,2-dimethylcyclohexane: one axial, one equatorial

Drag a model to rotate it.

cis-1,3-dimethylcyclohexane: both equatorial

Drag a model to rotate it.

When the two groups differ

If one group must be axial, put the smaller one axial. In cis-1-tert-butyl-4-methylcyclohexane the tert-butyl takes the equatorial position and the methyl is forced axial, because the alternative is far worse.

TipFor any "which chair is more stable" question, find the biggest group and put it equatorial first. Everything else follows from the cis or trans relationship.

Key ideas

The chapter on one page

Naming in four moves

  • 1. Parent: longest carbon chain (or the ring). On a tie, choose the chain with more substituents.
  • 2. Number to give the first substituent the lowest number. A functional group such as OH outranks substituents and gets the lowest number.
  • 3. Name substituents with locants. Use di, tri, tetra for repeats.
  • 4. Alphabetize. Ignore di, tri, sec and tert. Count iso and cyclo.

Suffixes and priority

  • Carboxylic acid (-oic acid) > aldehyde (-al) > ketone (-one) > alcohol (-ol) > amine (-amine) > alkene (-ene) / alkyne (-yne).
  • Halogens and ethers (alkoxy) are always substituents: fluoro, chloro, bromo, iodo, methoxy.
  • Bicyclics: bicyclo[x.y.z]alkane, with bridge sizes listed largest first.

Newman projections

  • Look straight down one C–C bond. Front carbon is the dot, back carbon is the circle.
  • Staggered (60° apart) is low energy. Eclipsed (0°) is high energy because of torsional strain.
  • Staggered with big groups 180° apart is anti (best). Big groups 60° apart is gauche.

Strain energies (kJ/mol)

  • H/H eclipsed 4 · CH₃/H eclipsed 6 · CH₃/CH₃ eclipsed 11 · CH₃/CH₃ gauche 3.8.
  • Ethane barrier 12. Propane barrier 14. Butane: anti 0, gauche 3.8, worst eclipsed 19.

Rings

  • Cyclopropane and cyclobutane are strained (angle plus torsional). Cyclohexane is strain-free in the chair.
  • Chair < twist-boat < boat < half-chair in energy.

Chairs

  • Each carbon has one axial (straight up or down) and one equatorial (out to the side) position.
  • A ring flip turns every axial into equatorial. Up stays up, down stays down.
  • Big groups want equatorial to avoid 1,3-diaxial interactions. Axial CH₃ costs 7.6 kJ/mol.
  • tert-Butyl is so large it locks the ring with itself equatorial.
  • cis/trans patterns: 1,2 and 1,4 trans = both equatorial possible; 1,3 cis = both equatorial possible.

Flashcards

51 cards

Nomenclature building blocksDrill this deck

PromptAnswer
Parent names for 1 to 5 carbonsMeth-, eth-, prop-, but-, pent-
Parent names for 6 to 10 carbonsHex-, hept-, oct-, non-, dec-
Parent names for 11 and 12 carbonsUndec-, dodec-

Name this substituent (* marks the attachment point).
Isopropyl (1-methylethyl)

Name this substituent.
tert-Butyl (1,1-dimethylethyl)

Name this substituent.
sec-Butyl (1-methylpropyl)

Name this substituent.
Isobutyl (2-methylpropyl)

Name this substituent.
Neopentyl (2,2-dimethylpropyl)
First rule for choosing the parent chainThe longest continuous carbon chain. If two are equal, take the one with more substituents.
How do you choose which end to number from?Give the lowest number at the first point of difference. If still tied, the first substituent alphabetically gets the lower number.
Which prefixes are ignored when alphabetizing?di, tri, tetra, sec- and tert-. The prefixes iso and cyclo are counted.
Halogen substituent namesFluoro, chloro, bromo, iodo
Suffix for an alcohol, and its numbering rule-ol. The carbon bearing OH gets the lowest possible number.
Suffix for alkene and alkyne-ene and -yne. Number so the multiple bond gets the lowest number.
Suffixes: aldehyde, ketone, carboxylic acid, amine-al, -one, -oic acid, -amine
Functional group priority for the suffixCarboxylic acid > aldehyde > ketone > alcohol > amine > alkene/alkyne
Ring or chain as the parent?Whichever has more carbons. If the ring wins, the chain is an alkyl substituent.
How is a bicyclic alkane named?bicyclo[x.y.z]alkane. x, y, z are the carbons in each bridge, largest first; the parent counts all carbons.
Name of an –OCH₃ substituentMethoxy
What does the "n" in n-butyl mean?Normal: an unbranched chain attached at its end.
Primary, secondary, tertiary carbonAttached to one, two or three other carbons

Newman projections & strainDrill this deck

PromptAnswer
Staggered conformationBonds on the front carbon sit 60° from bonds on the back carbon. Low energy.
Eclipsed conformationFront and back bonds line up (0° dihedral). High energy from torsional strain.
AntiThe two largest groups are 180° apart in a staggered conformation. Lowest energy.
GaucheThe two largest groups are 60° apart in a staggered conformation.
Cost of an H/H eclipsing interaction4 kJ/mol
Cost of a CH₃/H eclipsing interaction6 kJ/mol
Cost of a CH₃/CH₃ eclipsing interaction11 kJ/mol
Cost of a CH₃/CH₃ gauche interaction3.8 kJ/mol
Rotation barrier of ethane12 kJ/mol (three H/H eclipsing interactions)
Rotation barrier of propane14 kJ/mol (two H/H and one CH₃/H)
Highest-energy conformation of butaneMethyls eclipsing each other: 11 + 4 + 4 = 19 kJ/mol above anti
Torsional strain versus steric strainTorsional: repulsion between eclipsed bonding electrons. Steric: atoms forced too close together.
Dihedral angleThe angle between a front bond and a back bond in a Newman projection

Rings & chair conformationsDrill this deck

PromptAnswer
Why is cyclopropane so strained?60° bond angles (angle strain) and all C–H bonds eclipsed (torsional strain)
Which cycloalkane has essentially no ring strain?Cyclohexane, in its chair conformation
Axial positionPoints straight up or straight down, parallel to the ring axis
Equatorial positionPoints outward, roughly along the ring's equator
What happens in a ring flip?Every axial group becomes equatorial and vice versa. Up stays up and down stays down.
Why do substituents prefer equatorial?Axial groups suffer 1,3-diaxial interactions with the axial hydrogens two carbons away.
Energy cost of an axial methyl group7.6 kJ/mol (two gauche-like interactions of 3.8 each)
Why does tert-butyl "lock" a cyclohexane ring?An axial tert-butyl costs about 23 kJ/mol, so the ring stays in the chair that puts it equatorial.
Conformational energy order for cyclohexaneChair < twist-boat < boat < half-chair
What destabilizes the boat?Flagpole hydrogen interactions and eclipsed bonds
cis-1,2-disubstituted cyclohexane: positionsOne axial, one equatorial
trans-1,2-disubstituted cyclohexane: best positionsBoth equatorial
cis-1,3-disubstituted cyclohexane: best positionsBoth equatorial
trans-1,3-disubstituted cyclohexane: positionsOne axial, one equatorial
cis-1,4 and trans-1,4: positionscis: one axial, one equatorial. trans: both equatorial (best chair).
If two different groups compete, which goes equatorial?The larger one
On one chair carbon, the axial bond points up. Where does the equatorial bond point?Slightly down

Practice questions

A sample of the 37 in this chapter. Open one to check your answer.

IUPAC nomenclatureTake the quiz (12 questions)

Name this compound.

Answer: 2,2,4-Trimethylpentane

The longest chain has five carbons. Number from the end that gives 2,2,4 instead of 2,4,4.

Name this compound.

Answer: 3-Ethyl-4-methylhexane

Six-carbon parent with substituents at 3 and 4 either way. The first alphabetically (ethyl) takes the lower number.

Name this compound.

Answer: Isopropylcyclohexane

The ring has more carbons than the chain, so cyclohexane is the parent.

Newman projections & conformational energyTake the quiz (9 questions)

What is the most stable conformation of butane viewed along C2–C3?

Answer: Anti

Staggered with the methyl groups 180° apart has no torsional or steric strain.

How much less stable is gauche butane than anti butane?

Answer: 3.8 kJ/mol

A gauche CH₃/CH₃ interaction costs 3.8 kJ/mol.

What is the energy of the least stable conformation of butane, relative to anti?

Answer: 19 kJ/mol

CH₃/CH₃ eclipsed (11) plus two H/H eclipsed (4 + 4).

Cyclohexane chairsTake the quiz (11 questions)

Why does a methyl group prefer the equatorial position?

Answer: It avoids 1,3-diaxial interactions

An axial methyl bumps into the axial hydrogens on the same face, two carbons away.

After a ring flip, a substituent that was axial and up becomes…

Answer: equatorial and up

Axial and equatorial swap. Which face of the ring the group is on never changes.

In either chair of cis-1,2-dimethylcyclohexane, the methyl groups are…

Answer: one axial and one equatorial

Adjacent cis groups are both up, and neighboring "up" positions alternate axial and equatorial.